4-106 Communication
Ethernet Connector
The following specification is for the model equipped with Ethernet connection.
Standard
Fully integrated IEEE 802.3/802.3u–100 Base–TX/10 BASE–T Physical Layer
Speed
Auto Negotiation: 10Mbps/100Mbps, Full/Half Duplex
Connector Pin Assignment
The Ethernet I/Fconnector is an 8P8C modular connector (usually called RJ45) with the
following pin assignments:
Pin Position Signal Description
1 TX+
2 TX–
3 RX+
6 RX–
To Next Page
Loading...
