NCR RealPOS 7199 Thermal Receipt Station Printer 11
Choosing a Location
Normal Table Top
The 7199 Thermal Receipt Station Printer takes up a relatively small counter space and
may be set on or near the host computer. Make sure there is enough room to open the
receipt cover to change the paper. The following illustration shows the actual
dimensions of the printer, but leave several inches around the printer for connecting
and accessing the cables.
Wall Mounted
The 7199 Thermal Receipt Station Printer may be mounted on a vertical wall. Make sure
there is enough room to open the receipt cover to change the paper. Mount the screws
on the wall using the following recommended mount dimensions. Use a #8 wood screw,
which is to be securely fastened to a wall stud, or use a “Molly” fastener (not provided).
To Next Page
Loading...
