Configuration Network 7-119
Ethernet Configuration Setting Page
On Ethernet Configuration setting page, users can view or change the Ethernet
configuration.
To change the Ethernet configuration, do the following:
1. Change the values by doing any of the following:
• Enter a value in the corresponding text box.
• Select an option from the drop–down list.
2.
Select SAVECONFIGURATION to save the new Ethernet configuration in the
printer ROM.
Note: If all values are valid and the saving process is successful, the Save
Configuration Message is then displayed. If any value is invalid, the new Ethernet
configuration is not saved and an error message is then displayed. To check and
retry changing the values, select Top Page.
Note: To set the values to factory default, select FACTORYDEFAULT, and then
select SAVECONFIGURATION.
To Next Page
Loading...
