NCR RealPOS 7199 - TCP;IP Configuration Details; IP Address and Subnet Mask Settings

7-122 Configuration Network
TCP/IP Setting
This section discusses configuration parameters and default values for the
TCP/IPsetting.
IP setting
Items Default value Detail
IP
Address
192.168.1.1
Set Printer IP Address. This IP Address is effective
when Get IP Address is Manual.
Subnet
Mask
255.255.255.0
Set Printer Subnet Mask. This Subnet Mask
Address is effective when Get IP Address is Manual.
Default
Gateway
0.0.0.0
Set Printer Default Gateway. This Subnet Mask
Address is effective when Get IP Address is Manual.
Get IP
Address
Manual Select method of acquiring IP Address. Selectable
method is Manual or DHCP base on the Printer Dip
Switch Setting.
If Printer Dip Switch 1 OFF and Dip Switch 2 OFF,
Manual mode selected
If Printer Dip Switch 1 ON and Dip Switch 2 ON,
DHCP mode selected
DHCP IP
Address
0.0.0.0
Set requesting specific IP address to DHCP server.
If set 0.0.0.0, DHCP sever allocates printer IP
address automatically.
Note: IP addresses that cannot be set with Ethernet model printer are the following:
• 255.255.255.255 (Broad cast address)
• Local loopback address
• 127.***.***.***—this is the IP Address to send to oneself and *** is any value
from 0 to 255.