© NEC Corporation 2019 64
Deleting Fonts
Click the Screen control menu button. Step 1)
Click the Font Management function. Step 2)
Select the target terminal in the terminal list. Step 3)
Result: A pop-up dialog opens.
Click the Read back button at the bottom right to read back fonts on the terminal. Step 4)
Click the link in the font column of the target terminal. Step 5)
Result: The Font list in terminal page is displayed.
Select target fonts. Step 6)
Click the Delete button. Step 7)
Result: The font file is deleted.
5.3.4.12
Configuring Power (Power Control)
Configure board power, power on or off devices remotely, and set scheduled power control rules.
Board power: Control power supplies with relays on terminals.
Multi-function card power: Control power supplies with relays on multi-function cards.
When the power switch in ViPlex Express is turned on, the relay will be closed and the power
supply is connected. When the power switch in ViPlex Express is turned off, the relay will be
released and the power supply is disconnected.
Board Power Configuration
After board power configuration is done, VNNOX can perform power control on the devices
connected to the board power.
Click the Screen control menu button . Step 1)
Click the Power control function. Step 2)
Select the target terminal from the terminal list. Step 3)
Select the option to be controlled from the drop-down box. Currently, only screen Step 4)
power is supported.
Click the Apply button.
Step 5)
Manual Control
Click the Screen control menu button . Step 1)
Click the Power control function. Step 2)
Select the target terminal from the terminal list. Step 3)
Select Manual to enter the manual setting page. Step 4)
Turn the power switch on or off. Step 5)
Result: The power is turned on/off.
To Next Page
Loading...
Need help?
General
