EasyManuals Logo

NEC Aspire User Manual

NEC Aspire
262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
Section 3: Features
Product Description 133
3
Long Conversation Cutoff
Description
For incoming and outgoing central ofÞce calls, each trunk can be programmed to disconnect after a
deÞned length of time. The timer begins when the trunk is seized and disconnects the call after the
timer expires.
When used with the Warning Tone for Long Conversation feature, the system can provide a warn-
ing tone on outgoing trunks calls before the call is disconnected. This tone is not available to analog
single line telephone users nor is it available for incoming calls.
Loop Keys
Description
Loop keys are uniquely programmed function keys that simplify placing and answering trunk calls.
There are three types of loop keys: Incoming Only, Outgoing Only and Both Ways.
Incoming Only Loop Keys
Incoming Only loop keys are for answering trunk calls. An extension can have an incoming
loop key for a speciÞc trunk group (Þxed) or a “catch all” loop key for any trunk group
(switched). Fixed loop keys allow an extension user to tell the type of call by the ringing key.
Switched loop keys are ideal for an extension with a large number of feature keys. In addition,
switched loop keys are a destination for any trunk not on a line key or Þxed loop key. Without
a switched loop key, calls not appearing on a line key or Þxed loop key will ring only the
CALL key. Incoming Only loop keys also receive Transferred trunk calls.
Outgoing Only Loop Keys
Outgoing Only loop keys are for placing trunk calls. An extension can have outgoing loop keys for
a speciÞc trunk group or for ARS access. When a user presses the loop key, they get dial tone from
the Þrst available trunk in the group (or from ARS if programmed). Outgoing Only loop keys help
ensure that an extension will always have a key available for placing calls.
Both Ways Loop Keys
Both Ways loop keys combine the functions of both Incoming Only and Outgoing Only loop
keys. Both Ways loop keys work well for extension users that handle a moderate amount of
calls and don’t separate keys for incoming and outgoing calls. Both Ways loop keys also
receive Transferred trunk calls.
Aspire S Aspire M/L/XL
Available. Available.
Aspire S Aspire M/L/XL
Available. Available.

Table of Contents

Other manuals for NEC Aspire

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC Aspire and is the answer not in the manual?

NEC Aspire Specifications

General IconGeneral
VoIP SupportYes
Auto AttendantYes
Caller IDYes
Music on HoldYes
PagingYes
PowerAC adapter
DimensionsVaries by model
WeightVaries by model
NetworkingEthernet

Related product manuals