Section 3: Features
Product Description 185
3
Trunk Groups
Description
Trunk Groups let you optimize trunk usage for incoming and outgoing calls. With Trunk Groups,
users can have loop (rotary) keys for trunk calls. Incoming trunk group calls ring these loop keys.
For outgoing calls, the user presses a loop key to access the Þrst available trunk within the group.
You set the access order in trunk group programming.
Loop keys give an extension user more available function keys, since the user doesn’t need a sepa-
rate line key for each trunk. The user only needs one loop key for each trunk group. This simpliÞes
placing and answering calls.
Like Trunk Group Routing, Trunk Groups help you minimize the expense of toll calls. For exam-
ple, if your system has outbound WATS lines, OCC lines and DDD lines, program the trunk group
to route to the WATS lines Þrst.
Trunk Queuing/Camp On
Description
Trunk Queuing permits an extension user to queue (wait in line) on hook for a busy trunk or trunk
group to become free. The system recalls the queued extension as soon as the trunk is available.
The user does not have to manually retry the trunk later. Trunk Queuing lets the caller know when
the call can go through. If the extension user does not answer the Trunk Queuing ring, the system
cancels the queue request.
With Trunk Camp On, an extension user can queue (wait in line) off hook for a busy trunk or trunk
group to become free. The caller connects to the trunk when the trunk becomes free. As with Trunk
Queuing, the user does not have to manually retry the trunk later.
Any number of extensions may simultaneously queue or Camp On for the same trunk or trunk
group. When a trunk becomes free, the system connects the extensions in the order that the requests
were left.
Aspire S Aspire M/L/XL
• Available - 8 trunk groups. • Available - 100 trunk groups.
Priority Type of Trunk
1WATS
2 OCC
3 DDD
Aspire S Aspire M/L/XL
• Available. • Available.
To Next Page
Loading...
Need help?
General
