Section 3: Features
Product Description 117
3
Forced Trunk Disconnect
Description
Forced Trunk Disconnect allows an extension user to disconnect (release) another extension’s
active outside call. The user can then place a call on the released trunk. Forced Trunk Disconnect
lets a user access a busy trunk in an emergency, when no other trunks are available. Maintenance
technicians can also use Forced Trunk Disconnect to release a trunk on which there is no conversa-
tion. This can happen if a trunk does not properly disconnect when the outside party hangs up.
Group Call Pickup
Description
Group Call Pickup allows an extension user to answer a call ringing an extension in a Pickup
Group. This permits co-workers in the same work area to easily answer each other’s calls. The
user can intercept the ringing call by dialing a code or pressing a programmed Group Call Pickup
key. If several extensions within the group are ringing at the same time, Group Call Pickup inter-
cepts the call based on the extension’s priority within the Pickup Group.
With Group Call Pickup, a user can intercept the following types of calls:
● A call ringing the user’s own pickup group
● A call ringing another pickup group when the user knows the group number
● A call ringing another pickup group when the user doesn’t know the group number
Aspire S Aspire M/L/XL
• Available. • Available.
CAUTION
Forced Trunk Disconnect abruptly terminates the active call on the line. Only use this
feature in an emergency and when no other lines are available.
Aspire S Aspire M/L/XL
• Available - 8 Call Pickup Groups. • Available - 64 Call Pickup Groups.
To Next Page
Loading...
Need help?
General
