EasyManuals Logo

NEC Aspire User Manual

NEC Aspire
262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #160 background imageLoading...
Page #160 background image
Section 3: Features
152 Product Description
Off Hook Ringing
Use this option to enable or disable an extension’s Off Hook Signaling for incoming calls. If
enabled, Off Hook Signaling occurs normally. If disabled, calls queue behind the extension’s
busy line appearance and the user gets no Off Hook Signaling indication. The second line
appearance stays idle. The caller hears ringback tone while their call waits. This is set in the
called extension’s Class of Service.
DID Call Waiting
An extension can optionally have DID calls camp on with Off Hook/Call Wait signaling, with-
out Off Hook/Call Wait signaling or no signaling. This is set in the called extension’s Class of
Service.
Block Manual Off Hook Signals
This Class of Service option enables/disables a busy extension’s ability to block off hook sig-
nals manually sent from a co-worker. If disabled (not blocked), callers can dial 7 at busy or
busy/ring to signal the extension. If enabled (blocked), nothing happens when the caller dials
7 to off hook signal.
Block Camp On
If an extension has Block Camp On enabled, callers to the extension cannot dial 2 to Camp On
after hearing busy or busy/ring. If the extension has Block Camp On disabled, callers are not
prevented from dialing 2 to Camp on after hearing busy or busy/ring. This is set in the called
extension’s Class of Service.
One-Touch Calling
Description
One-Touch Calling gives a keyset user one button access to extensions, trunks and selected system
features. This saves users time when accessing co-workers, clients and features they use most often.
Instead of dialing a series of codes, the user need only press the One-Touch Key. An extension user
can have One-Touch Keys programmed for:
Direct Station Selection - one button access to extensions
Personal Speed Dial - one button access to stored numbers (up to 24 digits long)
Abbreviated Dialing - one button access to stored Abbreviated Dialing numbers
Trunk Calling - one button access to trunks or trunk groups
Service Codes - one button access to speciÞc Service Codes
Aspire S Aspire M/L/XL
Available. Available.

Table of Contents

Other manuals for NEC Aspire

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC Aspire and is the answer not in the manual?

NEC Aspire Specifications

General IconGeneral
VoIP SupportYes
Auto AttendantYes
Caller IDYes
Music on HoldYes
PagingYes
PowerAC adapter
DimensionsVaries by model
WeightVaries by model
NetworkingEthernet

Related product manuals