Section 3: Features
134 Product Description
An extension can have many loop keys - of any type. You can program an operator, for example,
with four loop keys for incoming calls and four for outgoing calls.
Once a loop key call is set up, the user can handle it like any other trunk call. For example, the user
can place the call on Hold, Transfer it to a co-worker or send it to a Park Orbit.
An incoming call will ring the Þrst available loop key, beginning with the lowest numbered key. If
keys 1-3 are loop keys, for example, the Þrst incoming call rings key 1. If key 1 is busy, the next call
rings key 2. If keys 1 and 2 are busy, the next call rings key 3. If all three keys are busy, additional
incoming calls queue for the Þrst available key. The telephone display will show “WAITING -
LOOP KEY” if the user presses a loop key when there are additional calls waiting.
Maintenance
Description
The Aspire system provides several features to help maintain the Aspire database, for backup, and
system analysis.
Database Maintenance
In addition to the keyset programming, the Aspire system provides the ability to use a PC to access
system programming. The Windows-based PCPro and the HTML-based WebPro allows you to:
● Edit the telephone system programming options from a remote location.
The PCPro application requires changes to be uploaded to the system before they take
affect. The WebPro application applies the changes as soon as the APPLY or OK icon is
clicked.
● Access system maintenance functions (like reports and tests) as well as:
● Slot Control (possible with telephone programming or WebPro access)
Allows the PCB slots to be deleted or reset
● Trunk Control (possible with telephone or PCPro programming or WebPro access)
Allows the trunks to be blocked so no new additional calls can be made on the PCB
● Extension Control (possible with telephone programming or WebPro access)
Allows hard or soft reset for each extension
● System Reset (possible with telephone programming or WebPro access)
Allows the system to be reset
Aspire S Aspire M/L/XL
• Available.
• Extension Data Swap function requires software 2.65+.
Extension Data Swap with service code/Secure Set
Relocation requires software 4.0E+.
• Program 23-02-01 added to Extension Data Copy with
software 2.67+.
• Program 32-02-01 added to Extension Data Copy with
software 4.93+.
• Available.
• Extension Data Swap function requires software 2.65+.
Extension Data Swap with service code/Secure Set
Relocation requires software 4.0E+.
• Program 23-02-01 added to Extension Data Copy with
software 2.67+.
• Program 32-02-01 added to Extension Data Copy with
software 4.93+.
To Next Page
Loading...
Need help?
General
