Section 3: Features
Product Description 135
3
In addition, PCPro allows you to:
● Save your programming to your PC’s hard disk - then upload it via a LAN (Local Area Net-
work), PPP, serial or USB connection.
PPP is a protocol that allows a computer to use a regular telephone line and a serial
interface (modem) to make TCP/IP connections.
● Download the existing programming in the telephone system via a LAN, PPP, serial or USB
connection - and save it to your PC’s hard disk.
● Set up a default database with the settings you use most often.
● Create a unique database for each phone system you have installed. Since you save the site-
speciÞc data to your PC’s hard disk, you can easily retrieve a customer’s programming if
something goes wrong.
Refer to the PCPro/WebPro Installation Manual for additional details (P/N 0893201).
Extension Data Swap Function Added
Depending on your software, the system can provide the ability to swap an extension’s program-
ming to another extension number. The following extension-based programs can be swapped:
Refere to Secure Set Relocation feature below for additional options.
Program
No.
Program Name
11-02 Extension Numbering
15-01 Extension Basic Data Setup (include Virtual Extension)
15-02 Multi-Line Telephone Basic Data Setup
15-03 Single Line Telephone Basic Data Setup
15-04 PHS Terminal Basic Data Setup
15-06 Trunk Access Map for Extension
15-07 Programmable Function Key
15-08 Incoming Virtual Extension Ring Tone Setup
15-09 Virtual Extension Ring Assignment
15-10 Incoming Virtual Extension Ring Tone Order Setup
15-11 Virtual Extension Delayed Ring Assignment
15-12 Conversation Recording Destination for Extension
20-06 Class of Service for Extension
21-02 Trunk Group Routing for Extensions
21-04 Toll Restriction Class for Extensions
21-07 Toll Restriction Override Password Setup
21-11 Hotline Assignment
23-02 Call Pickup Group
23-03 Ringing Line Preference
23-04 Ringing Line Preference for Virtual Extensions
24-03 Park Group Assignment
31-02 Internal Paging Group Assignment