Section 4: SpeciÞcations and Parts List
230 Product Description
Mechanical SpeciÞcations
Equipment Width Depth Height Weight
Aspire S KSU Cabinet 16 7/16” 5 3/8” 13 3/16” 13.22 lbs fully
equipped
Aspire M/L/XL KSU Cabinet 16 1/2” 10” 15 1/2” 55 lbs 11 oz
fully equipped
Aspire XL Power Supply
Cabinet
16 1/2” 10” 15 1/2” 45 lbs 12 oz
fully equipped
2 Button Telephone 6 3/8” 8 3/4” 2 3/4” 2 lbs 1 oz
22 Button Non-Display Keyset 7 3/4” 9 2/8” 3 7/8” no leg extension
5 7/8” legs fully extended
2 lbs 4 oz
22 Button Display Keyset 7 3/4” 9 2/8” 3 7/8” no leg extension
5 7/8” legs fully extended
2 lbs 4 oz
34 Button Display Keyset 7 3/4” 9 2/8” 3 7/8” no leg extension
5 7/8” legs fully extended
2 lbs 5 oz
Super Display Keyset 7 3/4” 10 7/8” 3 7/8” no leg extension
6 1/8” legs fully extended,
display down
7 7/8”legs fully extended,
display up
2 lbs 7 oz
IP Keyset 7 3/4” 9 2/8” 3 7/8” no leg extension
5 7/8” legs fully extended
2 lbs 13 oz
110-Button DSS 7 3/4” 9 2/8” 3 3/16” 1 lb 12 oz
24-Button DLS 2” 9 2/8” 2 15/16” 12 oz
Door Box 3 7/8” 1” 5 1/8” 6.5 oz
2PGDAD Module/NTCPU Input/Output
Audio/Music Input
Input Impedance: 47 KOhm @ 1Khz
Audio/Paging Output
Output Impedance:
Maximum Output:
600 Ohms @ 1 KHz
+3 dBm
Relay Contacts
ConÞguration:
Maximum Contact Ratings:
Normally Open
24 VDC, 0.5A
120 VAC, 0.25A
Night Mode Relay Connection, Input
Break:
Make:
48 VDC
7 mA
BGM/MOH Music Source Input
Input Impedance:
Input Level:
Maximum Input:
47KOhm / 1Khz
Nominal 250 mV (-10 dBm)
1V RMS
Inputs for MOH and BGM are located on the NTCPU PCB. The 2PGDAD also provides MOH inputs.