Section 4: SpeciÞcations and Parts List
Product Description 233
4
Cordless Lite II
General
Frequency Control
Modulation
Operating Temperature
Bandwidth
Data Transmission Speed
Channels
Phase Lock Loop
900 MHz Narrow Band FM with ADPMC (digital)
0
o
C - +50
o
C (+32
o
F to +122
o
F)
50 kHz
688 bps
30 Channels
Base Unit
Receive/Transmit Frequency
Power Requirements
Size
Weight
902 MHz - 928 MHz
10V DC from supplied AC adapter
4 1/4” W x 7 5/8” D x 2 1/4” H
Approximately 13.7 oz.
Handset
Receive/Transmit Frequency
Power Requirements
Size
Weight
Battery
Talk Mode
Standby Mode
902 MHz - 928 MHz
NiMH Battery
2” W x 1 1/4” D x 5 1/2” H (with antenna)
8.7 oz. with battery
Capacity 700 mAh, 3.6V
5 hours (typical)
40 hours (typical)
SpeciÞcations shown are typical and subject to change without notice.
Battery Charger
Power Requirements
Size
9V DC from supplied AC adapter
1 3/8” W x 1 1/2” D x 2 1/4” H
Range 350’ (depending on environmental conditions)
Cordless II
General
Frequency Control
Modulation
Operating Temperature
Output Power
Occupied Bandwidth
Data Transmission Speed
Channels
Phase Lock Loop
Digital Spread Spectrum
0
o
C - +50
o
C (+32
o
F to +122
o
F)
60 mW
+ 500 KHz
688 bps
10 Channels
Base Unit
Receive/Transmit Frequency
Power Requirements
Size
Weight
902 MHz - 928 MHz
10V DC from supplied AC adapter
4 1/4” W x 7 5/8” D x 2 1/4” H
11.8 oz.
Handset
Receive/Transmit Frequency
Power Requirements
Size
Weight
Battery
Charging Time
Talk Mode
Standby Mode
902 MHz - 928 MHz
Nickel-Cadmium Battery Pack
2 1/4” W x 1 1/2” D x 6 5/16” H
8.6 oz.
Capacity 800 mAh, 3.6V
5-6 hours max. to full charge
6 hours (typical)
4 days (typical)
SpeciÞcations shown are typical and subject to change without notice.
Battery Charger
Power Requirements
Size
Weight
9V DC from supplied AC adapter
4 3/4” W x 4 1/2” D x 3 1/2” H
6.5 oz.
Range 350’ (depending on environmental conditions)
To Next Page
Loading...
