NEC DS1000 Quick Setup Guide

Section 2: Customizing Features
2-6 ◆ Section 2: Customizing Features DS1000/2000 Quick Setup Guide
● Part II: Enable/disable Caller ID Class of Service options:
- Caller ID display (enabled by default).
- Second Call Caller ID (enabled by default).
- Third Party Caller ID Check (disabled by default).
- Caller ID display separator (disabled by default).
- Caller ID alert lamp for Caller ID Logging (enabled by default).
● Part III: Assign the Class of Service with the Caller ID options set to the extension.
● Part IV: To enable Caller ID Logging, assign the Caller ID Outbound Line/Group and the system’s
Home Area Code (HNPA). (To set up additional Caller ID Logging options, refer to the Caller ID Log-
ging feature in the Software Manual on the System Document CD that came with your system.)
Part I: Enable/Disable Caller ID Trunk Options:
1. Enter the programming mode. You see:
2. Enter
1001 + HOLD. You see:
3. Enter the trunk you want to program (e.g., 1) +
HOLD. You see:
4. Press
VOL Up until you see:
5. To enable built-in Caller ID for the trunk, dial 1 (for DSP) +
VOL Up.
OR
To disable Caller ID for the trunk, dial 0 +
VOL Up. You see:
6. To enable Caller ID integration with Voice Mail, dial
9 (for yes) + HOLD.
OR
To disable Caller ID integration with Voice Mail, dial
6 (for no) + HOLD.
7. Press CONF to go back to step 3 and select another trunk.
OR
Press
CONF twice to exit program 1001.
Part II: Enable/Disable Caller ID Class of Service Options:
1. Enter the programming mode. You see:
2. Enter 0101 + HOLD. You see:
3. Enter the Class of Service (1-15) you want to program +
HOLD. You see:
By default, the attendant (extension 300) has Class of Service 1. All other extensions have Class
of Service 2.
4. Press
VOL Up until you see:
5. To enable Caller ID for the Class of Service, dial
9 (for yes) + VOL Up.
OR
USER: nnn
ENTER PROGRAM?
1001:TRK DESCRIPTIOM
TRUNK PORT?n
1001:TRUNK PORT:n
TYPE?nnnn nnnn nnn
1001:TRUNK PORT:n
CALLER ID?nnn
1001:TRUNK PORT:n
VOICE MAIL CLID?nnn
USER: nnn
ENTER PROGRAM?
0101:CLASS OF SERVICE
COS NUM?n
0101:COS:n
OFF PREM FWRD?nn
0101:COS:n
CLID DISPLAY?nnn

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English