EasyManuals Logo

NEC DS1000 Quick Setup Guide

NEC DS1000
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
Section 2: Customizing Features
2-12 Section 2: Customizing Features DS1000/2000 Quick Setup Guide
2. Enter 1801 + HOLD. You see:
3. Enter the 34-button keyset extension you want to program (e.g., 300) +
HOLD. You see:
4. Press
VOL Up until you see:
5. Enter the type of DSS Console attached to the extension you selected in step 3 above (1=24-button,
2=110-button) +
VOL Up. You see:
6. Enter the number of the DSS Block (1-4) you want to assign to the DSS Console attached to the exten-
sion you are programming +
HOLD.
Normally, the rst console you install has block 1, the second has block 2, etc.
7. Press
CONF to go back to step 3 and select another extension to program.
OR
Press
CONF twice to exit program 1801.
Part II: Program the DSS Console Keys.
1. Enter the programming mode. You see:
2. Enter 1704 + HOLD. You see:
3. Enter the number of the DSS Console block you want to program (see Part I) +
HOLD. You see:
4. Enter the number of the DSS Console key you want to program (1-110) +
HOLD. You see:
The previously programmed assignment for the selected key displays.
5. For the key selected, enter the code for the feature you want to assign plus any additional data (see the
chart below) +
VOL Up.
You can optionally press ICM + VOL Up to scroll through the available DSS Console key
options. For more on the features listed, refer to the Software Manual on the System Document CD.
1801:EXTENSION PROG
EXTENSION?nnn
1801:EXT:nnn
PT TYPE?nn nnnnnnnnn
1801:EXT:nnn
DSS TYPE?nnnn
1801:EXT:nnn
DSS BLOCK NUM?n
USER: nnn
ENTER PROGRAM?
1704:DSS KEY PROG
DSS BLOCK NUM?
1704:DSS KEY PROG
DSS KEY:n
DSS BLOCK:n KEY:n
nnnnnnnnnnnn
Feature Key Code
Undened (blank) Key
00
Line Key 03 + Line number (e.g., 1)
Park Orbit Key 04 + Park Orbit (60-69)
Hotline Key 05 + Hotline Partner’s Extension (e.g., 304)
Call Coverage Immediate Ring 06 + Covered Extension (e.g., 304)
Call Coverage No Ring (lamp only) 07 + Covered Extension (e.g., 304)
Call Coverage Delay Ring 08 + Covered Extension (e.g., 304)
Group Pickup Immediate Ring 09 + Pickup Group (1-16)

Table of Contents

Other manuals for NEC DS1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC DS1000 and is the answer not in the manual?

NEC DS1000 Specifications

General IconGeneral
BrandNEC
ModelDS1000
CategoryTelephone
LanguageEnglish

Related product manuals