Section 2: Customizing Features
DS1000/2000 Quick Setup Guide Section 2: Customizing Features ◆ 2-31
2
7. Repeat from step 2 to program another bin number, or press SPK to exit.
To dial a Personal Speed Dial Number:
1. Press
ICM and dial #.
2. Dial the Personal Speed Dial bin number (701-720).
For one-button access to your Personal Speed Dial numbers:
1. Press Personal Speed Dial Key for bins 1-10, or
Press DIAL then Personal Speed Dial key for bins 11-20, or
Press Programmable Function key for Personal Speed Dial bin.
System Speed Dial
To Program a System Speed Dial Number:
1. Dial
#SP.
2. Dial the System Speed Dial bin number (normally 200-299) + Press HOLD.
3. Enter the trunk number (e.g., 1) you want the system to use when dialing your stored number,
OR
Enter the Trunk Group number you want the system to use when dialing your stored number (e.g., 90).
4. Press
HOLD + Enter the number you want to store + Press HOLD.
The Speed Dial number can be up to 32 digits long. If the number is longer than 16 digits, it
automatically uses the next adjacent bin in addition to the bin you are programming.
5. Enter a name for the Speed Dial number + Press
HOLD.
6. Repeat from step 2 to program another bin number, or Press CONF to exit.
To dial a System Speed Dial Number:
1. Press
ICM and dial #.
2. Dial the System Speed Dial bin number (normally 200-299), or
Press Programmable Function Key for System Speed Dial bin.
To Next Page
Loading...
Need help?
General
