DSX Product Description Features ◆ 27
Features
- If the extension has Call Forwarding enabled, and the user presses the key and waits (for at least 6
seconds), Call Forwarding is automatically cancelled.
- If the extension has Call Forwarding disabled, and the user presses the key and waits (for at least 6
seconds), the prior Call Forwarding mode is automatically enabled (if any).
❥ While the extension is busy, pressing the key switches Call Forwarding on and off.
Call Forwarding Toggle in a Personal Speed Dial Bin
If an extension doesn’t have an available Feature Key for a Call Forwarding key, the user can program a Per-
sonal Speed Dial bin for similar operation (without the BLF). To do this:
❥ While on hook, dial #77.
❥ Press the key for the Personal Speed Dial bin you want to program + HOLD.
❥ For LINE/GRP/ICM, press INTERCOM + HOLD.
❥ For NUM, dial *3 + HOLD.
❥ For NA, enter a name of your choosing + HOLD.
❥ Press SPEAKER to exit.
While the extension is idle, pressing the bin key puts the extension in the Call Forwarding programming
mode - the same as pressing INTERCOM and dialing *3.
❥ If the extension has Call Forwarding enabled, and the user presses the bin key and waits (for at least 6
seconds), Call Forwarding is automatically cancelled.
❥ If the extension has Call Forwarding disabled, and the user presses the bin key and waits (for at least 6
seconds), the prior Call Forwarding mode is automatically enabled (if any).
Call Forwarding Confirmation Tone
Keyset users will hear a single confirmation beep after enabling or cancelling Call Forwarding. Single line
telephone users will hear Intercom dial tone after enabling or cancelling Call Forwarding.
Call Forwarding Off Premises
Off Premises Call Forwarding allows a keyset user to forward their calls to an off-site location (such as a cell
phone or remote office) if allowed by their Class of Service. Keyset users can stay in touch by having Off
Premises Call Forwarding automatically forward their calls while they are away from the office. To set up
Off Premises Call Forwarding, the user selects the line or Line Group over which the call should route, as
well as the number the system should dial. The number dialed can be from an extension’s Personal Speed
Dial bin containing an outside number, or the user can enter an outside number directly into their Personal
Speed Dial bin 720. When a call rings the forwarded extension, the system selects the specified line or group
and then outdials the stored number.
Off Premises Call Forwarding reroutes:
❥ Intercom calls
❥ Transferred calls
❥ Direct Inward Lines
Call Forwarding Key BLF
This flash rate: Means:
Off Call Forwarding is disabled.
Fast flash The extension is in the Call For-
warding programming mode.
Slow flash Call Forwarding is enabled at the
extension.
When a user is out of the office, they can send their calls to their home office or cell phone.
To Next Page
Loading...
Need help?
General
