66 â—† Features DSX Product Description
When the keyset is idle, the Reverse Voice Over key functions the same as a Hotline key. The key also shows
at a glance the status of the associated extension:
Reverse Voice Over uses a system Conference circuit while it is active. The following table shows the sys-
tem’s Conference capacities:
The system’s 32 Conference circuits are dynamically allocated as users request them.
Ringdown Extension
A Ringdown Extension automatically calls a co-worker, voice mail, a Ring Group, a UCD Group, or a Speed
Dial number when the user lifts the handset. The call automatically goes through — there is no need for the
user to dial digits or press additional keys. Ringdown extensions are frequently used for lobby phones, where
the caller just lifts the handset to get the information desk.
Ringing Line Preference
Ringing Line Preference lets a keyset user answer a ringing call by just lifting the handset. For a user that
primarily answers calls, Ringing Line Preference ensures that ringing calls have priority. The tables below
Reverse Voice Over Busy Lamp Indications
When the key is: The covered extension is:
Off Idle or not installed
On Busy or ringing
Medium Flash Assigned extension is in DND for outside
calls (option 1)
Fast Flash
Assigned extension is in DND for Intercom
calls (option 2) or All Calls (option 3)
Description Capacity
Conference circuits 32
Maximum simultaneous users in Conference
(total of all Conferences system-wide)
32
Maximum simultaneous conferences 8
Maximum parties in any one Conference
(lines and/or extensions)
8
Call another extension, group or voice mail just by lifting the handset.
Simply lift the handset to answer a ringing call.
To Next Page
Loading...
Need help?
General
