DSX Product Description Features ◆ 33
Features
The system’s 32 Conference circuits are dynamically allocated as users request them.
Cordless Telephone
The DSX Cordless Lite II Telephone (P/N 730087) is a 900 Mhz digital narrow band FM cord-
less telephone that provides mobility, flexibility and convenience for those who spend much of
the workday away from their desk. Fully integrated with the DSX system, the DSX Cordless
Lite II Telephone offers many standard features such as Call Forwarding, Call Coverage, Hot-
line, and Voice Mail. Complemented by 4 fully programmable function keys (with LEDs), the
DSX Cordless Lite II Telephone achieves a whole new level of convenience and mobility. An
easy-to-read 16-character by 2-line LCD display (with four status icons), volume controls, a
rechargeable Nickel Metal Hydride Battery Pack, and a handy belt clip round out the elegant
and affordable DSX Cordless Lite II Telephone.
Delayed Ringing
Delayed Ringing allows a line to start ringing a preset interval after the call starts flashing a line key. This is
helpful for co-workers that cover each other’s calls. For example, a secretary can have Delayed Ringing for
the lines that ring the boss’s telephone. If the boss doesn’t answer after the Delayed Ringing interval, the call
will start ringing the secretary’s extension.
Dial Number Preview
Dial Number Preview lets a display keyset user dial and review a number before the system dials it out.
Dial Tone Detection
The system can optionally detect precise CO dial tone for automatically dialed outside calls (such as Speed
Dial and Auto Redial calls). With Dial Tone Detection enabled for a line, the system will monitor the line
when initially seized for valid dial tone or stutter dial tone. If valid EIA/TIA dial tone is detected, the system
outdials the call on the line. If dial tone is not detected within 2 seconds, the system will try the next avail-
able line in the same line to which the initial line belongs. If another line in the group is not available, the
user hears busy tone. Dial Tone Detection does not apply to manually dialed outside calls.
If Dial Tone Detection is disabled, the system waits 500mS after line seizure and then outdials the number.
If enabled, Dial Tone Detection applies to the following types of outside calls:
❥ Auto Redial (initial line seizure)
❥ Caller ID (callbacks)
❥ Last Number Redial
❥ Call Forwarding Off Premise
Maximum simultaneous conferences 8
Maximum parties in any one Conference
(lines and/or extensions)
8
Provides cordless mobility and a rich feature set for employees away from their desks.
Delayed Ringing helps co-workers cover each other’s unanswered calls.
Dial Number Preview helps the user avoid dialing errors.
You can set up the system to detect CO dial tone.
Description Capacity
To Next Page
Loading...
Need help?
General
