DSX Product Description Features ◆ 49
Features
Automatic Hold
Automatic Hold allows a user to be on an outside call, activate a feature, and automatically place the call on
Hold without first pressing the HOLD key. The system places a call on Hold automatically when the user
presses CONF, INTERCOM, or a Hotline key. Automatic Hold optionally allows a user, busy on an outside
call, to press another line key or a Call Coverage Key to automatically put their initial call on Hold.
Intercom Hold
A user can place an Intercom call on Hold. The Intercom call on Hold does not indicate at any other exten-
sion. There is no Hold Recall for Intercom calls.
Distinctive Flash Rate on Recall
System Hold and Exclusive Hold recall feature a distinctive flash rate for line keys (see the chart below).
This allows the keyset extension user to easily differentiate new calls that are ringing from held calls that
are recalling.
Distinctive Flash Rate on Recall
For this type of call:
You see this flash rate:
System Hold Exclusive Hold
Call that you placed on Hold
Single Wink On (green) Double Wink On (green)
Call that you initially placed on Hold
recalling your phone
Double Wink On (green) Double Wink On (green)
Call a co-worker placed on Hold at
their extension
Single Wink On (red) None (On red)
Call a co-worker initially placed on
Hold recalling your phone
Double Wink On (red) Double Wink On (red)
To Next Page
Loading...
Need help?
General
