78 ◆ Features DSX Product Description
❥ The extension to which the call was initially transferred.
Handsfree Transfer
Handsfree Transfer allows an extension user to Transfer an outside call directly to a co-worker’s speakerphone.
Hotline Automatic Transfer
With Hotline Automatic Transfer, the extension can Transfer their call to a co-worker just by pressing their
Hotline key and hanging up. Without Hotline Automatic Transfer, the user must press TRANSFER before
pressing the Hotline key. If the user frequently uses their Hotline key for one-button Transfer to co-workers,
Hotline Automatic Transfer is recommended. If the user prefers to consult with their Hotline partner rather
than Transfer, disabling Hotline Automatic Transfer would be helpful.
• Pressing TRANSFER + Call Coverage Key can Transfer a call to an uninstalled extension’s mailbox
(if the mailbox is enabled).
• Pressing a Hotline key can also Transfer a call to an uninstalled extension’s mailbox (if the mailbox is
enabled).
User Programmable Features
User Programmable Features allow an extension user to dial mnemonics to customize the way certain features
work on their telephone. With User Programmable Features, there is no need to rely on a System Administra-
tor or Communications Manager to set up each phone. These User-Programmable Features include:
❥ Call Forwarding Clear All
❥ Direct Station Selection (DSS) Assignment
❥ Feature Key Assignment
❥ Feature Key Ringing for Call Coverage Keys, Group Call Pickup Keys, and Line Keys
❥ Headset Mode
❥ Hotline Key Assignment
❥ Off Hook Signaling Setup (including Camp-On, Off Hook Ringing for outside calls, and Voice Over for
Intercom calls)
❥ Paging (Incoming)
❥ Prime Line Assignmen
❥ Programmable Idle Menu Soft Keys (Super Display)
❥ Ringing Line Preference
❥ Speed Dial Bin Setup (Personal and System)
❥ Time and Date
❥ Voice Announce (For incoming Intercom calls)
Extension users can set up their telephones to meet their own unique requirements.
User Programmable Features
To program a feature, press # and the feature’s code. For example, to enable incoming Paging, press # and dial V P Y, then
SPEAKER to hang up. By default, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to
the attendant.
Feature Mnemonic Numeric Operation Access Level
Call Forwarding Clear All
#CC #22
#CC
+ Y to clear (cancel) forwarding or N to
exit without clearing + SPEAKER to hang up.
4 and 5
Headset Mode
#HS #47
#HS
+ Y to enable or N to disable + SPEAKER
to exit.
3-5
Hotline
#HL #45
#HL
+ Press flashing Hotline key + Enter exten-
sion for new Hotline partner + HOLD + Pro-
gram another Hotline key or SPEAKER to exit.
3-5
To Next Page
Loading...
Need help?
General
