NEC DSX PRODUCT DESCRIPTION User Manual

DSX Product Description Features ◆ 79
Features
Off Hook Signaling
#OHS #647
#OHS
+ Select mode ( 1 = Outside line , 2 =
Hotline partner, 3 = Intercom ) + Select option
(see below) + SPEAKER to exit.
For outside lines: 1 = Camp-On tone, 2 = Off-
hook Ringing, CLEAR = None
F
or Hotline partner: 1 = Camp-On, 2 = Voice
Over, CLEAR = None,
For Intercom: 1 = Camp-On, 2 = Voice Over,
CLEAR = None
3-5
Paging (Incoming)
#VP #87
#VP
+ Y to enable or N to disable + SPEAKER
to exit.
3-5
Prime Line Assignment
#PLA #752
#PLA
+ Press one of your flashing programma-
ble keys, INTERCOM, or CLEAR for none +
SPEAKER to exit.
3-5
Feature Key Assignments
#KP #57
#KP
+ Press key you want to program + HOLD +
INTERCOM + Press Volume Up or Volume
Down
to select key option + HOLD + (Enter any
additional data if required
1
+ HOLD ) + Press
Volume Up or Volume Down to select another
key to program, or SPEAKER twice to exit.
3-5
1
To set up a System Night key, press CLEAR
instead of entering additional data.
Feature Key Ringing
#RAC #722
Call Coverage Keys: #RAC + Call Coverage
Key repeatedly to select ringing mode +
SPEAKER to exit.
Call Coverage Keys flash as follows: Lamp only
= On red, Immediate ring = On green, Delay
ring = Fast flash green.
2-5
#RAL #725
Outside Line Keys: #RAL + Line Key repeatedly
to select ringing mode + SPEAKER to exit.
Line keys flash as follows: Lamp only = On red,
Immediate ring = On green, Delay ring = Fast
flash green, Night ring = Slow flash green.
#RAP #727
Group Call Pickup Keys: #RAP + Group Call
Pickup Key repeatedly to select ringing mode +
SPEAKER to exit.
Group Call Pickup Keys flash as follows: Lamp
only = On red, Immediate ring = On green,
Delay ring = Fast flash green.
Programmable Idle Menu
Soft Keys (Super Display)
#SM #76
Press the soft key you want to program (or press
Volume Up or Volume Down to scroll through
the keys) + HOLD + INTERCOM + Volume Up
or Volume Down to select key option + HOLD
+ SPEAKER to exit.
1-5
Ringing Line Preference
#RLP
#757 #RLP + Y to enable or N to disable +
SPEAKER to exit.
2-5
User Programmable Features
To program a feature, press # and the feature’s code. For example, to enable incoming Paging, press # and dial V P Y, then
SPEAKER to hang up. By default, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to
the attendant.
Feature Mnemonic Numeric Operation Access Level

NEC DSX PRODUCT DESCRIPTION Specifications

General

Brand	NEC
Model	DSX PRODUCT DESCRIPTION
Category	Telephone System
Language	English