36 â—† Features DSX Product Description
Night Mode Control
The extension to which the line is terminated controls the night mode of the line. For example, if extension
301 has line 1 assigned as a DIL, the user can press DND to switch line 1 to its night routing destination.
Switching line 1 to night mode at extension 301 has no affect on the night mode of the system. This flexibil-
ity could allow a service dispatcher with several DILs to independently send lines to their night destinations
without affecting the night mode of the entire system.
Direct Line Access
Direct Line Access lets an extension user access (seize) an individual line. After seizing the line, the user can
dial any outside telephone number without restriction. An extension’s Class of Service allows or denies
Direct Line Access. Direct Line Access is normally only provided for attendants, priority users and mainte-
nance personnel.
Direct Station Selection (DSS)
If an extension’s Direct Station Selection (DSS) Keys are enabled, Feature Keys automatically become
Direct Station Selection (DSS) keys when the user presses INTERCOM. Direct Station Selection provides an
extension user with one-button Intercom access and Transfer to co-workers. Each DSS key also provides a
Busy Lamp Field (BLF) for the assigned co-worker.
Priority users can access lines directly. Direct Line Access also lets maintenance personnel
access and test individual lines.
Quickly place and Transfer calls to co-workers, without having to look up or dial your co-
worker’s extension numbers.
Important
• If you enable an extension’s DSS Keys and leave the extension’s default Prime Line programming
intact, the line keys automatically change to DSS keys when the user lifts the handset.
When the DSS/BLF key is: The covered extension is:
Off Idle
On Busy or ringing
Flashing fast In Do Not Disturb
To Next Page
Loading...
Need help?
General
