1. Setup Procedure
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
Chapter 1 Installing OS
4. Run POST.
After a while, the following message appears at lower left of the screen.
Press <F2> SETUP, <F4> ROM Utility, <F12> Network
If you press F2, SETUP will start after POST, and the Main menu appears. (You can also start SETUP
by pressing F2 while expanding option ROM.)
< Example >
Tips For [System Time], use Coordinated Universal Time
(UTC). The specified UTC time is
applied to the ESXi host to be installed later. In ftSys Management Appliance or other
guest OS, set the time zone for each system.
5. When you move the cursor onto "Advanced", the Advanced menu appears.
Choose "PCI Configuration" and press Enter.
To Next Page
Loading...
