1. Setup Procedure
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
Chapter 1 Installing OS
6. Move the cursor onto “PCI Slot x Option ROM” (x: the slot where FC card is installed) and press Enter.
Parameters will be displayed.
< Example >
7. Among the parameters, choose “Enabled” and press Enter.
The current display of the configuration for PCI Slotx Option ROM will be changed to “Enabled”
8. Select an item other than PCI Slot x Option ROM for the PCI slot in which FC card is installed, and
press Enter. Select Disabled from the parameters displayed, and press Enter. Repeat these steps
for all items other than PCI Slot x Option ROM for the PCI slot in which FC card is installed.
To Next Page
Loading...
