Overview 8
Both SSA and the SSA CLI need sg driver(scsi generic) to access RAID Controller in Linux. Red Hat Enterprise
Linux 7.1 and later does not load sg driver automatically. You should load the driver and type 'modprobe sg'
before running SSA or SSA-CLI.
To use SSA in the online environment, obtain the executable files from NEC Corporate Website
(http://www.nec.com/) or Starter Pack.
Install SSA
Procedure
Microsoft OS
1. Sign-in to the Windows with Administrators privilege.
2. Put on the Starter Pack in the media drive.
3. Move to Starter Pack directory and run the start_up.bat.
4. Click [Integrated Installation] on the Starter Pack menu.
5. Select the [Standard Program Package], Click Install.
Linux OS
1. Open the contents.html in Start Pack directory.
2. Remember the [Filename] in [Description].
o Smart Storage Administrator (SSA) for Linux 64-bit
o Smart Storage Administrator (SSA) CLI for Linux 64-bit
o Smart Storage Administrator Diagnostic Utility (SSADU) CLI for Linux 64-bit
3. Login root user.
4. Put on the Starter Pack in the media drive.
5. Create a mount point. ※No need to procedure, if created.
# mkdir /media/cdrom
6. Mount a Starter Pack.
# mount -r -t iso9660 /dev/sr0 /media/cdrom
7. Move to packages.
# cd /media/cdrom/packages
8. Install rpm files of filename in procedure 2.
e.g.
# rpm -ivh ssacli-x.x-x.x.x86_64.rpm
Installed module, run the each execute file by the next way.
o GUI, CLI - See “Launching SSA”
o Scripting - Run the ssascripting.exe (Windows）, ssascripting (Linux）
Launching SSA
Procedure
Microsoft OS
1. Click Start, and then select Programs>Windows System>Smart Storage Administrator>Smart Storage
Administrator.
SSA launches in application window. SSA then scans the system and detects controllers. When
controller detection is complete, the controllers are available on the Controller/Device menu.
2. Configure a controller. For more information, see "Configuring a controllor"
When configuration is complete, continue with the next step.
To Next Page
Loading...
Need help?
General