NEC PE455UL - Page 107

5. Making Connections
87
Connecting HDMI Input
You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook
type PC to the HDMI IN terminal of your projector.
HDMI 1 IN
HDMI 2 IN
HDMI cable (not supplied)
UseHighSpeedHDMI®Cable.
Audio cable (not supplied)
• Selectthesourcenameforitsappropriateinputterminalafterturningontheprojector.
Input terminal INPUT button on the projector cabinet Button on the remote control
HDMI 1 IN HDMI1 HDMI1
HDMI 2 IN
HDMI2 HDMI2
• WhenconnectingtheHDMI1INterminal(orHDMI2INterminal)oftheprojectortotheDVD
player, the projector’s video level can be made settings in accordance with the DVD player’s video
level. In the menu select [HDMI SETTINGS] → [VIDEO LEVEL] and make necessary settings.
• IftheHDMIinput’ssoundisnotoutput,checkif[HDMI1]and[HDMI2]areset[HDMI1]and[HDMI2]
correctly the on-screen menu [SETUP] → [OPTIONS(1)] → [AUDIO SELECT]. (→ page 75)