NEC PE455UL - Page 95

4. Using On-Screen Menu
75
Enablingthedeinterlace[DEINTERLACE]
Turns on or o the deinterlace function for a telecine signal.
OFF Selectthisoptionifthereisanyjitterorartifactsinvideo.
ON Defaultstandardsetting.
NOTE:
• ThisfunctionisnotavailableforHDTV(progressive)andcomputersignals.
SettingHDMI1orHDMI2[VIDEOLEVEL]
Make the settings for each video level when connecting HDMI equipment.
Select [AUTO] to automatically detect video level. If automatic detection may not work well, select
[NORMAL] to disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to
improve image contrast and increase detail in the dark areas.
SettingAudio[AUDIOSELECT]
This selects the audio inputs of the HDMI 1 IN terminal, HDMI 2 IN terminal, and LAN port of the unit.
When inputting analog audio, connect the audio output terminal of the connected device to the
AUDIO IN terminal of the unit and set the audio input selection to [COMPUTER].
EnablingKeySoundandErrorSound[BEEP]
This feature turns on or o the button sound or alarm when an error occurs or the following opera-
tions are performed.
TIP:
• Volumecontrolfor[BEEP]isdisabled.AV-MUTEbuttonisnoteectivetostopbeepingsound.IfyouwanttoactivateBEEPfunction,
set[BEEP]to[OFF].