NEC PE455UL - Page 41

2. Projecting an Image (Basic Operation)
21
Selecting Default Source
You can so that it will be displayed each time the projector is turned on.
1. Press the MENU button.
The menu will be displayed.
2. Press the ▶buttontwicetoselect[SETUP]andthe▼ button or the ENTER button to select
[GENERAL].
3.
Press the ▶ buttonvetimestoselect[OPTIONS(2)].
4. Pressthe▼buttonvetimestoselect[DEFAULTINPUTSELECT] and press the ENTER
button.
The [DEFAULT INPUT SELECT] screen will be displayed.
5. Select a source as the default source, and press the ENTER button.
6. Press the EXIT button a few times to close the menu.
7. Restart the projector.
The source you selected in step 5 will be projected.
TIP:
• Whentheprojectorandcomputerareconnectedandtheprojectorisinstandby,itispossibletoturnontheprojector’spowerand
projectthecomputer’sscreenautomaticallybydetectingthecomputersignalsorHDMIsignalsissuedfromthecomputer.
 ([AUTOPOWERON]→page77)
• OnWindows7,acombinationoftheWindowsandPkeysallowsyoutosetupexternaldisplayeasilyandquickly.