NEC PE455UL - Page 87

4. Using On-Screen Menu
67
PINCUSHIONTOP/BOTTOM Correctspincushiondistortionatthetoporbottomside.
(→page42)
CORNERSTONE Fitsaprojectedimagewithintheborderofthescreeneasilybyalign
thefourcornerofanimagetotheonesofthescreen.(→page39)
TIP:
• Adjustablerangeofthe[KEYSTONE]andthe[CORNERSTONE]:
Horizontal Direction Vertical Direction
Approx. ±30° (Max) Approx. ±30° (Max)
 Adjustablerangemaybenarrowerdependingoninputsignal.
[PCTOOL]
Recall the geometric correction data that is registered in the projector beforehand.
The geometric correction data using our Geometric Correction Tool application (→ page 44) is
registered here.
NOTE:
• Aselectricalcorrectioniscarriedoutingeometriccorrection,thebrightnessmaybeaectedandthepicturequalitymaybe
degraded.
[RESET]
Resets the item selected at [MODE] on the [GEOMETRIC CORRECTION] screen.
The operation diers depending on the mode selected at [MODE].
MODE Operation
KEYSTONE Allthe[KEYSTONE]adjustmentsareresettotheirinitialvalues.
PCTOOL Turnsothe[PCTOOL]setting.
Theregistereddatawillnotbereset.
OFF Resettingisinvalid.
TIP:
• ResettingcanbeexecutedbypressingandholdingtheKEYSTONEbuttonontheremotecontrolforover2seconds.