NEC PX700W - Using Image Express Utility 2

202
8. User Supportware
Using Image Express Utility 2
Connecting to a projector
1 Conrmthattheprojectorhasbeenturnedon.
2 ClicktheAirPortstatus( )ontheMacintoshmenubar,andclick“TurnAirPortOn”.
The AirPort status is changed to “ ” or “ ”.
• AirPortstatustypesandmeanings
...AirPort : Off
...AirPort : On ( in infrastructure connection )
...AirPort : On ( in adhoc connection )
REFERENCE:
When the AirPort status ( / / )isnotdisplayedonthemenubar:
1 ClickAppleMenu( )and[SystemPreferences...].
The “System Preferences” window will be displayed.
2 Click[Network].
The Network configuration window will be displayed.
3 Select[AirPort]in[Show].
4 Click[AirPort]tab.
The AirPort configuration item will be displayed.
5 Checkthe“ShowAirPortstatusinmenubar”checkboxatthebottomcongurationitem.
The AirPort status ( / / ) will be displayed on the menu bar.
6 Clickthe[ ]buttonattheupperleftontheNetworkcongurationwindow.
The Network configuration window will be closed.