NEC PX700W - Adjusting with the Remote Control

23
2. Projecting an Image (Basic Operation)
Adjusting with the remote control
1. PresstheLENSSHIFTbutton.
The Lens Shift screen will be displayed.
2. Press the ▼▲◀ or ▶button.
Use the ▼▲◀▶ buttons to move the projected image.
TIP:
• Thediagrambelowshowsthelensshiftadjustmentrangeforthedesktopfront.Toraisetheprojectionpositionhigherthanthis,
usethetiltfeet.(→ page 25)
• Fortheceilingmount/frontprojectionlensshiftadjustmentrange,seepage214.
1V
1H
0.1H 0.1H
0.5V
Height of projected image
Width of projected image
1V
1H
0.1H 0.1H
0.5V
Height of projected image
Width of projected image