NEC Univerge SV8100 - Page 1074

Issue 5.0 UNIVERGE SV8100
1 - 1064 UNIVERGE Multimedia Conference Bridge
16-01-05 Department Group Basic Data
Setup – Extension Group All
Ring Mode Operation
Set if all members of the group
should ring automatically (1) or
through the use of the service
code (0) defined in Program
11-12-09. Selecting automatic will
override the settings of Programs
16-01-03 and 16-01-04.
0 = Manual
1 = Automatic
(default = 0)
16-01-06 Department Group Basic Data
Setup – STG Withdraw Mode
Use to set the STG withdraw
mode for each department group.
0 = Disable (Camp On)
1 = Enable (Overflow
Mode)
(default = 0)
16-01-07 Department Group Basic Data
Setup – Call Recall Restriction
for STG
Determine whether or not an
unanswered call transferred to a
Department Group should recall
the extension from which it was
transferred.
0 = Disable (Recall)
1 = Enable (No Recall)
(default = 0)
16-01-09 Department Group Basic Data
Setup – Department Hunting No
Answer Time
Set how long a call rings a
Department Group extension
before hunting occurs.
64800 (seconds)
(default = 15 seconds)
16-01-10 Department Group Basic Data
Setup – Enhanced Hunt Type
Set the type of hunting for each
Extension (Department) Group.
0 = No queuing
1 = Hunting When
Busy
2 = Hunting When Not
Answered
3 = Hunting When
Busy or No Answer
(default = 0)
16-02-01 Department Group Assignment
for Extensions
Set up the Department Group
called by the pilot number and the
extension priority when a group is
called.
Call Pickup Groups are set up in
23-02.
Department Groups
1-64
Priority 1-512
Default = All
extensions in
Department Group 1
with priority in port
order:
Port 1 priority = 1
Port 512 priority = 512
20-13-13 Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
Turn Off (0) or On (1) an extension
user ability to use Continued
Dialing, which allows DTMF signal
sending while talking on
extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
Program
Number
Program Name Description/Comments Assigned Data