NEC Univerge SV8100 - Page 1139

UNIVERGE SV8100 Issue 5.0
Voice Response System (VRS) 1 - 1129
22-14-05 VRS Delayed Message for IRG –
2nd Delayed Message Sending
Count
For each Ring Group, set the
number of times the second
message is played (0~255). This
program is also used for VRS
Waiting Message.
0~255 (time)
(default = 0)
22-14-06 VRS Delayed Message for IRG –
Tone Kind at Message Interval
For each Ring Group, determine
what the caller hears between
messages (0 = Ringback Tone, 1 =
MOH, 2 = BGM). This program is
also used for VRS Waiting
Message.
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
(default = 0)
22-14-07 VRS Delayed Message for IRG –
Disconnect Time After the end of
VRS Waiting Message
For each Ring Group, set how
long the system waits after playing
the VRS message before
disconnecting the call. To prevent
the call from disconnecting, set
this option to 0. This program is
also used for VRS Waiting
Message.
0 = No Disconnect
1~64800 Seconds
(default = 60)
22-15-01 VRS Delayed Message for
Department Group – 1st Delayed
Message Start Time
For each Department Group, set
how long the system waits before
playing the first message
(0~64800 seconds). This program
is also used for VRS Waiting
Message.
0~64800 (seconds)
(default = 0)
22-15-02 VRS Delayed Message for
Department Group – 1st Delayed
Message Number
For each Department Group,
select the message number to be
played as the first message
(0~100). This program is also
used for VRS Waiting Message.
0~101
0 = No Message
101 = Fixed Message
(default = 0)
22-15-03 VRS Delayed Message for
Department Group – 1st Delayed
Message Sending Count
For each Department Group, set
the number of times the first
message is played (0~255). This
program is also used for VRS
Waiting Message.
0~255 (time)
(default = 0)
22-15-04 VRS Delayed Message for
Department Group – 2nd
Delayed Message Number
For each Department Group,
select the message number to be
played as the second message
(0~100). This program is also
used for VRS Waiting Message.
0~101
0 = No Message
101= Fixed Message
(default = 0)
22-15-05 VRS Delayed Message for
Department Group – 2nd
Delayed Message Sending Count
For each Department Group, set
the number of times the second
message is played (0~255). This
program is also used for VRS
Waiting Message.
0~255 (time)
(default = 0)
Program
Number
Program Name Description/Comments Assigned Data