Issue 5.0 UNIVERGE SV8100
1 - 6 Account Code – Forced/Verified/Unverified
Related Features
Automatic Route Selection
PBX Compatibility
Speed Dial – System/Group/Station
Station Message Detail Recording
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
14-01-11 Basic Trunk Data Setup –
Account Code Required
Enable (1) or disable (0) Account
Codes for each trunk.
0 = Disable
1 = Enable
(default = 1)
15-07-01 Programmable Function Keys Assign a function key as an
Account Code key (code 50). Use
this key instead of the dial pad to
enter the
* before and after the
Account Code.
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
20-13-20 Class of Service Options
(Supplementary Service) –
Account Code/Toll Restriction
Operator Alert (Restricted
Operation Transfer)
In an extension Class of Service,
turn On (1) or Off (0) the Operator
Alert when a forced account code
is incorrectly entered.
0 = Off
1 = On
(default = 0 for COS
01~15)
21-01-14 System Options for Outgoing
Calls – Forced Account Code
Inter-digit Timer
The system waits this time for a
user to enter a Forced Account
code.
0~64800 (seconds)
(default = 3 seconds)
21-04-01 Toll Restriction Class for
Extensions
Use this option to assign a Toll
Restriction Class (1~15) to an
extension.
Day/Night Mode
1~9 (9 = Power Failure
Mode)
1~15
(default = 2)
To Next Page
Loading...
