NEC Univerge SV8100 - Page 177

UNIVERGE SV8100 Issue 5.0
Call Forwarding, Off-Premise 1 - 167
11-11-48 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward Busy/No Answer
(Split)
Use to assign the Call Forward
Busy No Answer Split Service
Code.
MLT, SLT
(default not assigned)
11-11-49 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward Both Ring (Split)
Use to assign the Call Forward
Both Ring Split Service Code.
MLT, SLT
(default not assigned)
11-11-52 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward All Destination (No
Split)
Use to assign the Call Forward All
for any Extension Service Code.
MLT, SLT
(default = 791)
11-11-53 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward Busy Destination
(No Split)
Use to assign the Call Forward
Busy for any Extension Service
Code.
MLT, SLT
(default = 792)
11-11-54 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward No Answer
Destination (No Split)
Used to assign the Call Forward
No Answer for any Extension
Service Code.
MLT, SLT
(default = 793)
11-11-55 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward Busy/No Answer
Destination (No Split)
Use to assign the Call Forward
Busy No Answer for any Extension
Service Code.
MLT, SLT
(default = 794)
15-07-01 Programmable Function Keys Use to assign functions to multiline
terminal line keys.
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
Program
Number
Program Name Description/Comments Assigned Data