NEC Univerge SV8100 - Page 518

Issue 5.0 UNIVERGE SV8100
1 - 508 Flexible System Numbering
11-11-03 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– No Answer
Set the service code for setting call
forwarding for no answer.
MLT, SLT
(default = 845)
11-11-04 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Busy/No Answer
Set the service code for setting
call forwarding for busy or no
answer.
MLT, SLT
(default = 844)
11-11-05 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Both Ring
Set the service code for setting
call forwarding for busy or no
answer.
MLT, SLT
(default = 842)
11-11-07 Service Code Setup (for Setup/
Entry Operation) – Call
Forwarding – Follow Me
Set the service code for setting
call forwarding for follow me.
MLT, SLT
(default = 846)
11-11-08 Service Code Setup (for Setup/
Entry Operation) – Do Not
Disturb
Set the service code for setting
call forwarding for Do Not Disturb.
MLT, SLT
(default = 847)
11-11-09 Service Code Setup (for Setup/
Entry Operation) – Answer
Message Waiting
Use to customize the answer
message waiting used for
registration and setup.
MLT, SLT
(default = 841)
11-11-10 Service Code Setup (for Setup/
Entry Operation) – Cancel All
Messages Waiting
Use to cancel all messages
waiting used for registration and
setup.
MLT, SLT
(default = 873)
11-11-11 Service Code Setup (for Setup/
Entry Operation) – Cancel
Message Waiting
Use to cancel message waiting
used for registration and setup.
MLT, SLT
(default = 871)
11-11-12 Service Code Setup (for Setup/
Entry Operation) – Alarm Clock
Use to customize the alarm clock
used for registration and setup.
MLT, SLT
(default = 827)
11-11-13 Service Code Setup (for Setup/
Entry Operation) – Display
Language Selection for multiline
terminal
Use to customize the display
language for multiline terminal
used for registration and setup.
MLT
(default = 778)
11-11-14 Service Code Setup (for Setup/
Entry Operation) – Text Message
Setting
Use to customize the text
message setting used for
registration and setup.
MLT
(default = 836)
11-11-15 Service Code Setup (for Setup/
Entry Operation) – Enable
Handsfree Incoming Intercom
Calls
Use to customize the enable
handsfree incoming intercom calls
used for registration and setup.
MLT
(default = 821)
11-11-16 Service Code Setup (for Setup/
Entry Operation) – Force Ringing
of Incoming Intercom Calls
Use to customize the force ringing
of incoming intercom calls used for
registration and setup.
MLT
(default = 823)
Program
Number
Program Name Description/Comments Assigned Data