NEC Univerge SV8100 - Page 955

UNIVERGE SV8100 Issue 5.0
Station Message Detail Recording 1 - 945
20-07-18 Class of Service Options
(Administrator Level) – SMDR
Printout Accumulated Extension
Data
Used to determine if Accumulated
Extension Data is included in the
SMDR report for each COS.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
20-07-19 Class of Service Options
(Administrator Level) – SMDR
Printout Department Group
(STG) Data
Used to determine if Department
Group (STG) Data is included in
the SMDR report for each COS.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
20-13-20 Class of Service Options
(Administrator Level) – SMDR
Printout Accumulated Account
Code Data
Used to determine if Accumulated
Account Code Data is included in
the SMDR report for each COS.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
20-13-36 Class of Service Options
(Supplementary Service) – Call
Duration Timer Display
In an extension Class of Service,
turn On (1) or Off (0) a Call Timer
for the extension.
0 = Off
1 = On
(default = 1 for COS
01~15)
35-01-01 SMDR Options – Output Port
Type
This option specifies the type of
connection used for SMDR. The
baud rate for the COM port should
be set in Program 15-02-19.
0 = None
3 = LAN
4 = CTA/CTU
(default = 0)
35-01-03 SMDR Options – Header
Language
Specify the language in which the
SMDR header should be printed.
0 = English
1 = German
2 = French
3 = Italian
4 = Spanish
(default = 0)
35-01-04 SMDR Options – Omit Digits Enter the number of digits (1~24)
you want SMDR to block (i.e., X
out). Enter 0 not to block any
digits.
0~24
(0 = Not applied)
(default = 0)
35-01-05 SMDR Options – Minimum Digits Enter the minimum number of
digits a user must dial (1~24)
before the system includes a call
on the SMDR report. Enter 0 to
include all outgoing calls,
regardless of the number of digits
dialed.
0~24
(0 = Not applied)
(default = 0)
35-01-06 SMDR Options – Minimum Call
Duration
Enter the minimum duration of a
call that prints on the SMDR
report. Enter 0 to have calls of any
duration print.
0~65535 (sec)
(0 = All)
(default = 0)
Program
Number
Program Name Description/Comments Assigned Data