EasyManua.ls Logo

NEC Univerge SV8100 - Page 986

NEC Univerge SV8100
1174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Issue 5.0 UNIVERGE SV8100
1 - 976 Tandem Trunking (Unsupervised Conference)
20-07-11 Class of Service Options
(Administrator Level) – Forced
Trunk Disconnect (analog trunk
only)
Turns Off (0) or On (1) an
extension to use Forced Trunk
Disconnect. This allows the
extension to disconnect an
Unsupervised Conference in
progress.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-11-11 Class of Service Options (Hold/
Transfer Service) – Automatic
On-Hook Transfer
Turns Off (0) or On (1) the
Trunk-to-Trunk Transfer
Restriction. If enabled,
Trunk-to-Trunk Transfer is not
possible.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-11-14 Class of Service Options (Hold/
Transfer Service) –
Trunk-to-Trunk Transfer
Restriction
Turns Off (0) or On (1) the
Trunk-to-Trunk Transfer
Restriction. If enabled,
Trunk-to-Trunk Transfer is not
possible.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang Up
Allow (0) an extension user’s
ability to set up a tandem call
automatically when they hang up.
0 = Off
1 = On
(default = 0 for
COS 1~15)
24-02-07 System Options for Transfer –
Trunk-to-Trunk Transfer Release
Warning Tone
This timer starts when a trunk
begins talking with another trunk
(for example: Trunk-to-Trunk
Transfer, outgoing from trunk,
Tandem Trunking) (0~64800
seconds).
0~64800 (seconds)
(default = 1800
seconds)
24-02-10 System Options for Transfer –
Disconnect Trunk-to-Trunk
This timer starts after the
Trunk-to-Trunk warning tone is
heard (0~64800 seconds).
0~64800 (seconds)
(default = 0 seconds)
25-07-07 System Timers for VRS/DISA –
Long Conversation Warning
Tone Time
Determine the time a DISA caller
or any trunk-to-trunk (such as
Tandem Trunking) conversation
can talk before the Long
Conversation tone is heard
(0~64800 seconds).
0~64800 (seconds)
(default = 3600
seconds)
25-07-08 System Timers for VRS/DISA –
Long Conversation Disconnect
Time
Determine the time the system
waits before disconnecting a DISA
or any trunk-to-trunk (such as
Tandem Trunking) call after the
Long Conversation tone is heard
(0~64800 seconds).
0~64800 (seconds)
(default = 10 seconds)
Program
Number
Program Name Description/Comments Assigned Data

Table of Contents

Other manuals for NEC Univerge SV8100

Related product manuals