1 - 16 Chapter 1
Chapter 1 - WL1700 Setup
Reset the WL1700-MS by clicking the Reset menu option. Click OK in the following screen to confirm the
reset. A window will appear prompting you to save the configuration or to reset without saving. Click the save
and reset button. .
Wait while the WL1700-MS boots up. Once the WL1700-MS has rebooted, the IP address for connecting to
the unit will be the entry defined in the Initial Configuration file modified on page page 1-10. The WebView
access should be closed out, and if needed, reopened using the new IP address.
To Next Page
Loading...
Need help?
General