NEC UX5000 - Move the UX to the Customers Network; Check the MH240 Handset

Chapter 3 - Modifying the IP Addresses
Chapter 3 3 - 11
3.1.4
Move the UX to the Customer’s Network
Move the UX5000 to the customer’s network (A.B.C.D/X) and reboot the UX5000 to allow the new IP address
to take effect.
3.1.5 Check the MH240 Handset
Associate the MH240 to the NEC-Voice and check that the MH240 can register to the UX5000.