2-24 Getting Started
Battery Operation
Your NEC Versa LitePad tablet PC comes with a rechargeable 4-cell
lithium ion (Li-Ion) battery pack already installed. The battery pack
provides the main power source when you are operating the tablet PC
on battery power.
For information about installing or removing the battery, see the
section, “Replacing the Battery” later in this chapter. For information
about using the battery pack, see the next section.
Note See “Windows Power Management” in Chapter 4 to fully utilize
battery power in your NEC Versa LitePad tablet PC.
Using the Battery Pack
See the table “Tablet PC Status LEDs” in Chapter 1 for a description
of the Power and Battery LED status. Also see “Determining Battery
Status” and “Identifying Low Battery Status” in this chapter for battery
power information.
To prevent data loss, fully charge the battery
pack before running the tablet PC on battery power (see “Connecting
the AC Adapter” earlier in this chapter).
To prevent accidental battery ignition or
explosion, adhere to the following:
Keep the battery away from extreme heat.
Keep metal objects away from the battery connectors to prevent a
short circuit.
Always run the tablet PC with a battery installed.
Make sure the battery is properly installed in the battery bay.
To Next Page
Loading...