Using the BIOS Setup Utility 3-7
Battery Refresh — Launches the Refresh Battery utility. The utility
fully discharges your battery. Once refreshed, your battery is
conditioned to recharge to its full capacity. To recharge the battery,
connect your NEC Versa LitePad tablet PC to AC power.
Advanced Menu
Use the Advanced menu to set the following functions.
Advanced CMOS Setup
Parameter Default
Setting
Alternate
Setting(s)
USB Legacy Support Enabled Disabled
Remote Power on Enabled Disabled
Intel
®
SpeedStep™ Technology Enabled Disabled
CPU Power Management Enabled Disabled
USB Legacy Support — When set to Enabled, enables support for
a legacy USB device.
Remote Power On — When set to Enabled, allows the LAN board
to wake the system.
Intel
®
SpeedStep™ Technology — When enabled, Intel SpeedStep
technology is controlled by the operating system or applet. The
system works at the optimized performance. When disabled, the
system operates in a power conservation mode.
CPU Power Management — When enabled, allows CPU power
management.
To Next Page
Loading...