3-8 Using the BIOS Setup Utility
Security Menu
Use the Security menu to configure your system for protection against
unauthorized access.
System Security Setup
Parameter Default Setting Alternate
Setting(s)
Supervisor Password Is: Not Installed (automatically
detected)
User Password Is: Not Installed (automatically
detected)
Change Supervisor Password Press Enter
Change User Password Press Enter
Boot Password Required No Yes
Set Master HDDs Security
Password*
Press Enter
Set User HDDs Security
Password
Press Enter
*Display of Set Master HDDs Security parameter requires Supervisor
Password enabled.
Supervisor Password Is — Display only. Automatically displays
password status.
User Password Is — Display only. Automatically displays
password status.
Change Supervisor Password — Allows you to set or change the
Supervisor password. The Supervisor password allows access to all
Setup items.
Change User Password — Allows you to set or change the User
password. The User password allows limited access to Setup items.
To enter a User password, a Supervisor password must be enabled.
Boot Password Required — If set to Yes, requires a password on
system startup.
To Next Page
Loading...