Solving System Problems 8-5
Troubleshooting
Problem What to Do
Pen doesn’t work well. Watch the cursor on the tablet screen
rather than the tip of the pen.
If you changed screen orientation,
recalibrate your pen.
If the tip of the pen is worn and it is a
replaceable tip, replace the tip.
An optional component
does not work.
Make sure the component is securely
installed or connected. Verify that the
system parameter for the I/O port
configuration is set correctly in Setup.
If You Need Assistance
If you have a problem with your computer, first review the checklist
and troubleshooting table in the previous section.
If you still have a problem, see Chapter 9, “Getting Service and
Support,” for details about contacting NEC Solutions America.
Note If you are using this product outside the U.S. or Canada,
please contact the local NEC office or their dealers for the support and
service available in your country.
To Next Page
Loading...