Using the BIOS Setup Utility 3-19
5. Using a fine-tipped object, lift the cover and change switch 1 to
“ON” to enable a password override. This setting erases your
current password set in the BIOS Setup utility.
Never use a pencil to change switch settings.
Residue from the pencil can damage the system.
Leave the other switches at their default settings (OFF). Changing the
settings can cause the system to malfunction.
6. Replace the memory module cover and screw, plug in the AC
adapter, and power on the system.
7. At the startup screen, press the DOWN button to enter the BIOS
Setup utility. Select the Security menu and check that switch
setting procedure has cleared the password.
8. Power off the system and disconnect AC power. Turn over the
tablet PC.
9. Turn over the tablet PC and remove the memory bay cover.
10. Set switch 1 back to “OFF” (see the previous figure).
11. Replace the memory module cover and screw, plug in the AC
adapter, and power on the system.
12. At the startup screen, press the DOWN button to enter the BIOS
Setup utility. Select the Security menu and set a new password.
To Next Page
Loading...