NEC VERSA SX - Using Keys; Checking;Setting System Parameters

Using the Software 3-5
Using Keys
The following table lists the BIOS Setup keys and their functions.
BIOS Setup Key Functions
Key Function
↑ ↓
Moves the cursor between the displayed parameters.
PgUp/PgDn Modifies the current parameter settings.
Tab For some parameter settings, moves the cursor between the
subfields. Also moves the cursor to the next line or selection.
For example, for System Time, Tab moves the cursor from
hour to minute to second.
Esc Exits the current screen and returns to the Main Menu screen.
From the Main Menu screen, displays the prompt, “Quit without
saving.”
F3/F4 Changes the screen color.
Checking/Setting System Parameters
See the following table for a list of parameters, their factory default
settings, and alternate settings. A description of each setting follows the
table.
To reset all parameters to the default settings, select Auto Configuration
with Defaults from the BIOS Setup Main Menu and press
Y
and
Enter
.