NEC VERSA SX - Updating the BIOS

3-18 Using the Software
3.
Move the cursor down and highlight Suspend Mode.
4.
Press the
PgUp
key and select STF.
5.
Save the settings and exit BIOS Setup.
There are two ways to invoke the NEC Versa's STF feature, one
automatic and one manual.

After 30 minutes of inactivity, your NEC Versa automatically invokes
STF, provided you have configured STF in the BIOS Setup utility.

You can manually invoke STF by pressing
Fn
+
Power
button
simultaneously, before you leave your NEC Versa.
Note:
When the status bar indicates that there
is only 3% power remaining in the system, the NEC
Versa automatically performs a Save to File.
Updating the BIOS
Use the BIOS Update Diskette (BUDLite) to update your NEC Versa
system BIOS. Specifically, the BIOS is the code transmitted onto the
ROM (Read-Only Memory) on your system.
Note:
You only need to update the BIOS if NEC
CSD makes significant improvements or fixes to the
current system BIOS. Your authorized NEC CSD
dealer or NEC CSD Support Services representative
can help you determine this.
If you are informed that the default BIOS needs an upgrade, to receive a
copy of the BUDLITE contact the Versa Laptop Fulfillment Hotline at
(800) 842-6446, or NEC CSD Support Services at (800) 632-4525,
Fax (978) 635-4100.
You should only use the BIOS upgrade diskette for your specific model.