Using the Software 3-23
Follow these steps to use the NEC Customize utility.
1. Double click the NEC Customize icon.
2. From the display window, select the option that you want to execute.
3. Click Launch to execute the selected option.
4. Click OK when the program execution is complete.
5. Click Exit.
HDPREPEZ Utility
Using the HDPREPEZ utility automatically configures your NEC
Versa’s system’s save-to-file (STF) area on the hard disk drive.
Procedures for using HDPREPEZ for Windows 95 and Windows NT
systems differ. See the instructions appropriate for your system.
Note:
For more details about the HDPREPEZ
utility, see the HDPREPEZ.TXT file in the
NECUTILS/HDPREP directory.
Using HDPREPEZ in Windows 95
In Windows 95, run the HDPREPEZ utility if you increase the memory
capacity in your NEC Versa beyond the factory installed base memory.
Follow these steps to run the HDPREPEZ utility.
1. Power off and restart your NEC Versa.
2. At the statement “Starting Windows 95,” press
F8
.
3. From the Startup menu, select Option 6, “Safe Mode Command
Prompt Only.”
4. Enter MS-DOS. At the c: prompt, type
cd \necutils\hdprep
and
press
Enter
to change to the \necutils\hdprep directory.
5. Type
HDPREPEZ
and press
Enter
. The utility automatically
prepares your NEC Versa for the newly installed memory.
To Next Page
Loading...
