Using the Hardware 4-17
4. Press the button on the side of the PC card in the slot.
CardWizard Services
CardWizard, a software interface, manages the automatic allocation of
system resources in Windows NT. It detects when a PC card is installed
or removed. CardWizard also provides an interface to other software in
order to load any necessary hardware drivers.
CardWizard provides Socket Services, a Basic Input Output System
(BIOS) software interface that isolates driver software from the
hardware. It provides a variety of system-specific functions, such as
system slot and card detection while the system is operating.
Communication Cards
You can use both fax/modem and network PC cards with your NEC
Versa. Here are some suggestions to help you get the best system
performance.
Note:
If you are using this unit outside of the
United States or Canada, contact a local NEC CSD
dealer for availability information.
Network Cards — You can use a network card with your system to
gain access to a local area network (LAN).
You can insert a network card in either slot.
Fax/Modem Cards - You can use a PC card modem with your system
to communicate with others via fax, e-mail, or connect to an online
service or bulletin board.
You can insert a fax/modem card in either slot.
Always insert the fax/modem card before using your fax/modem
software application. If you start the application before inserting the
fax/modem card, the application typically does not find the card.
To Next Page
Loading...
